Makimus Elektronik - - Prostowniki to najlepsze produkty w swojej kategorii - PS-30-48-800 (10Ah - 225Ah)

Battery Charger PS-30 series are designed for very demanding clients. They have the ability to set many parameters, making them very carefully, you can charge the batteries of various types and sizes, while having the assurance that there is no damage. Throughout the charging process is controlled by a modern microcontroller, which keeps the search parameters and monitors the battery charge status. Battery chargers are suitable for charging lead - acid, gel and basic ni-cd (without unloading). They give the opportunity to work both cyclic (when battery is fully charged the unit is off) and so. byforowej work (when battery is fully charged, the charger switches to monitor the battery pack attached and after partial discharge of the charging process resumes.)

The charger is charging the battery of three types:

- The first type are standard rechargeable sealed lead - acid used in motor vehicles powered by combustion engines. They are both battery maintenance (in which the electrolyte level should be checked and if necessary, supplement it through the refill of distilled water) and so. maintenance-free batteries do not require special maintenance.

- The second type are known. a variation of gel batteries battery lead - acid, in which the electrolyte is in the form of a gel. This allows the battery can operate in any position without the risk of leakage. These types of batteries can be found in vehicles powered by electric motors, wheelchairs for disabled persons, electric scooters, caravans, for generator, boats, pontoons, etc.

- The third type of an alkaline battery ni-cd. For safety reasons, rechargeable alkaline batteries is added only at the express request. Activating this feature is free.

The following list describes the key advantages of the battery charger PS-30-48-800:

- Large LCD display, visible in both lit and darkened rooms. Thanks to him we are constantly informed about the status of the unit.

- Intuitive menu in Polish and English.

- The choice of a rechargeable battery. As mentioned earlier, we have a choice of three types of batteries. Thus, the unit selects the optimal characteristics of the charge, which prevents damage to the battery, and significantly increases its service life.

- Selectable charge. There is a charge mode and a circular buffer.

- Ability to set the charging current. This allows you to select the charge current to the battery capacity possessed. This feature gives us confidence that even deeply discharged battery, the charging cycle takes no more than the current set, might negatively affect its viability.

- Ability to modify the tension which occurs when you reach the end of the charging process. This function should be used only by persons having adequate knowledge of recharging the batteries. People do not have such knowledge, it is recommended to use the default values set at the factory.

- Up to 9 set by the user charging schemes. With this feature, we can save the previously selected parameters. For re-charging the same battery just select the program number to which you have saved all settings.

- Memory actual parameters. This allows the voltage decay rectifier remember all the settings and when you finish voltage charging.

- Preview the current value of both the charging current and voltage at the battery terminals reigning on the LCD.

- Protection against reverse polarity of the battery. In such a situation will not allow the device to start charging.

- Short circuit protection crocodiles - even long wires shorted output device does not damage it.

- Reducing the charging voltage, so that the final stage of charging, the voltage across its terminals will not exceed the recommended value for him. The system works similarly to the voltage regulator charging alternators are responsible for charging the batteries in vehicles. With this feature, so. gassing in batteries for lead - acid is minimized or absent altogether.

- The soft - start. Toroidal transformers draw large inrush current, which sometimes triggers the installation of fuses in the building. The use of soft - start completely eliminates this phenomenon.

- Three stage thermal protection circuit which eliminates the damage to the device, even under the most adverse conditions for him.

- Active cooling system (electric fan) has led to significantly improve performance.

- Safety system battery against overcharging. With it you connect the charger to the battery, we do not interfere with battery charging. After the battery is fully charged, the charging process is automatically interrupted, and the same charger can be disconnected at a later time (without compromising battery life).

Below the most important technical information about the product:

Battery Charger Model: PS-30-48-800

Supply Voltage: 230VAC 50Hz

Power Rating: 810VA

Battery voltage: 48V

Charging current limit: 1A - 15A (adjustable at 1A)

Recommended battery capacity: 10Ah - 225Ah

Dimensions: Length: 350mm / width 205mm / height (without handle): 115mm

Weight: approximately 10 kg

Cable length: 3m

The length of wires to the battery: 2.5 m

With the charger you will receive:

- Handle for portability, together with screws for mounting;

- Manual

- Sales slip

- Stamped warranty card, valid for a period of 24 months from the date of sale